Patients' Opinions on Antibiotics in the Treatment of Dental Infections: A Cross-Sectional Survey.

Background: The aim of this study was to evaluate patients' knowledge and perceptions of the use of systemic antibiotics in the treatment of endodontic infections and to determine the possible contribution of patients to the development of bacterial resistance. Methods: A total of 550 patients were asked to respond to a survey on the perception of systemic antibiotic use in the treatment of endodontic infections and antibiotic resistance during January 2022 and March 2023. A bivariate and multivariate analysis was performed to determine possible correlates in the population regarding antibiotic use in the endodontic world. Results: A total of 514 patients were included in the study, 65.9% of whom were women. While 34.6% of the population studied thought that it was always necessary to take antibiotics prior to endodontics, 49.4% considered that they were necessary after endodontics, regardless of the clinical symptoms. The prevalence of self-medication was 17.3%, and women self-medicate more than men, with significant differences (p < 0.05), although they have a greater knowledge of antibiotic resistance than men (p < 0.05). Forty-four percent of the population expected to take antibiotics when faced with dental pain, mainly women (p < 0.05). Conclusions: The general population is contributing to the serious problem of bacterial resistance. It is necessary to promote educational strategies focused on the correct use of antibiotics in the community. The worst results were found mainly in the population with a low level of education. The level of education was the variable that most influenced the knowledge and attitudes of the population, followed by the sex of the participants.

New Technique for Wedge Selection in Direct Class II Restorations: A Pilot Study.

Background: Performing an appropriate Class II direct restoration is a great challenge. The correct selection of the matrix system and the elements used for its stabilization will have a great impact on the result. The aim of this study is to show a new digital method for a predictable selection of the wedge and compare it with the conventional method. Methods: Sixty patients were randomly divided into two groups. In Group 0, the wedge was selected intraoperatively by visual examination, while in Group 1 the wedge was selected preoperatively through the measurement of the cervical embrasure on the bite-wing radiography. The number of wedges used, modifications to them, and tissue damage were registered, along with the quality of the proximal contact and the marginal adaptation. Results: Student's t-test revealed a statistical difference between the number of wedges used, which was higher in Group 0 (p < 0.05). Pearson Chi-square test showed that tissue damage was statistically higher in Group 0 (p < 0.05), while there was no statistically significant difference between groups in wedge modifications (p > 0.05). Group 1 revealed a higher frequency of satisfactory proximal contact and marginal adaptation (p < 0.05). Conclusions: This new technique reduces wedges waste and tissue damage and provides an adequate interproximal anatomy.

Effect of Dentin Irrigants on Push-Out Bond Strength in Resin Cementation Protocols for Fiber Posts in Endodontically Treated Teeth: An In Vitro Study.

The aim of this study is to analyze the effects of different endodontic irrigants and adhesive systems on the resin bond strength of fiber post cementation. In total, 144 single-rooted, unrestored human teeth were endodontically treated and randomly divided into 12 groups according to four endodontic irrigants (distilled water as control; EDTA 17%; NaOCl 5%; chlorhexidine digluconate 2%) and three different adhesive/resin cement systems (etch-and-rinse: orthophosphoric acid, Parabond® A+B/Paracore®; self-etch: ParaBond® Non-Rinse Conditioner, Parabond® A+B/Paracore®; Universal: ClearfilTM Universal Bond/ClearfilTM DC Core Plus). Forty-eight hours after post cementation, ten teeth from each group were cross-sectioned into three discs (cervical, middle and apical regions). Thirty specimens of each group (n = 30) were submitted to a push-out test at a crosshead speed of 1 mm/min. The remaining two teeth of each group were sectioned in the same manner, and the resin-dentin interface was evaluated using scanning electron microscopy (SEM). The results were statistically analyzed with the ANOVA test and Tukey's test (p < 0,01). The adhesive protocols and post space region showed no significant effect on bond strength (p > 0.01). The combination of NaOCl 5% and ClearfilTM Universal Bond reduced the adhesive strength (p < 0.01). The NaOCl 5%, in relation to other irrigants, significantly decreased the push-out bond strength.

Predictors of periapical bone healing associated with teeth having large periapical lesions following nonsurgical root canal treatment or retreatment: A cone beam computed tomography-based retrospective study.

AIM: Several factors influence the condition of the periapical tissues associated with root filled teeth. The primary objective of this study was to retrospectively evaluate the extent and speed of bone healing of large periapical lesions associated with nonsurgical root canal treatment or retreatment. The secondary objective was to analyse the relationship between the time to complete healing when analysed using cone beam computed tomography (CBCT) and other possible predictors that affect healing. METHODOLOGY: Seventy-nine patients were treated during the years 2013-2020 with large periapical lesions of endodontic origin (10-15 mm) as observed on intraoral periapical radiographs (IOPAR) were included. IOPAR and CBCT were available before treatment and during the follow-up (IOPAR every 6 months and CBCT every 12 months). The volume of periapical lesions was calculated by OsiriX Lite software. Variables such as initial volume of the lesion, age, gender, type of treatment or type of root canal filling were compared to identify the differences between healed and unhealed lesions. Pearson's Chi-square test was used for categorical variables, the t-test for age and the Wilcoxon test for initial volume of the lesion. The association between time to healing and the variables was assessed using univariate analysis and multivariate analysis. The Wilcoxon test was used to observe the association of healing time with categorical variables and the correlation index was measured with the quantitative variables. RESULTS: Of the 79 cases analysed, 60 lesions (76%) were completely healed as verified by CBCT in a mean healing time of 19 months, of which 60% healed fully between 12 and 18 months. Increase in age of patient and larger initial volume of the lesion were associated with a significantly longer healing time (p < .001). Gender, filling material and type of treatment did not have a significant effect on the healing process (p > .05). CONCLUSIONS: Clinicians should be aware that periapical lesions in older patients and larger areas of bone loss take longer to heal. CBCT monitoring of large periapical lesions is critical and it can help clinicians in the decision-making process.

Vertical preparation: a new technique for analogical and digital impressions.

The BOPT technique (Biologically Oriented Preparation Technique) was proposed by Loi et al. (1) and has become a popular form of vertical preparation for complete crowns with promising results. In this procedure, the clinician can operate on the gingival tissue during preparation and modify its structure in thickness and height by adding modifications on the provisional restoration. However, one of the main challenges in this technique is the transference of information about the gingival tissue to the laboratory technician, who will place the margin of the restoration randomly in a space determined by two marks on the working cast. The technique proposed enables the accurate transmission of the exact point where the margin of the restoration needs to be placed. Furthermore, it facilitates the recording of conventional impression materials and intraoral scanners due to the compression of polytetrafluoroethylene (PTFE) tape into the sulcus, which allows to arrest bleeding or intracrevicular liquid and is easily registered irrespective of the method of impression used. Key words:Vertical preparation, BOPT, PTFE, emergence profile, digital impression, conventional impression.

Conservative management of dens in dente.

Dens Invaginatus (DI) or dens in dente is an uncommon anomaly which mostly affects permanent lateral incisors, and it is very rare in molars. This article presents the conservative endodontic management of four different cases of DI and a discussion of the endodontic literature for this malformation. Three upper lateral incisors Type II, IIIa and IIIb, and an upper first molar Type II are shown. The most conservative approach possible was carried out. Three of the cases were obturated using the continuous wave technique. In one of the cases, it was possible to treat only the invagination with MTA and preserve the pulp vitality of the main canal. To make a correct diagnosis and to treat in the most conservative way possible, a DI is necessary to know its classification and use tools such as CBCT and magnification.

Guided Endodontics: A Literature Review.

The main objective of this paper is to perform an updated literature review of guided endodontics based on the available up-to-date scientific literature to identify and describe the technique, its benefits, and its limitations. Four electronic databases (PubMed, Scopus, Science Direct, and Web of Science) were used to perform a literature search from 1 January 2017 to 13 May 2022. After discarding duplicates, out of 1047 results, a total of 29 articles were eligible for review. Guided endodontics is a novel technique that is currently evolving. It is applied in multiple treatments, especially in accessing and locating root canals in teeth with pulp canal obliteration, microsurgical endodontics, and removing glass fiber posts in endodontic retreatments. In addition, it is independent of an operator's experience, requires less treatment time for the patient, and is more accurate and safer than conventional endodontics.

Impact of abutment geometry on early implant marginal bone loss. A double-blind, randomized, 6-month clinical trial.

OBJECTIVES: The objective of this study was to analyze the impact of the abutment width on early marginal bone loss (MBL). MATERIAL AND METHODS: A balanced, randomized, double-blind clinical trial with two parallel experimental arms was conducted without a control group. The arms were "cylindrical" abutment and "concave" abutment. Eighty hexagonal internal connection implants, each with a diameter of 4 × 10 mm, were placed in healed mature bone. The main variable was the peri-implant tissue stability, which was measured as MBL at 8 weeks and 6 months. RESULTS: The final sample consisted of 77 implants that were placed in 25 patients. 38 (49.4%) were placed using the cylindrical abutment, and the other 39 (50.6%) were placed using the concave abutment. The early global MBL of -0.6 ± 0.7 mm in the cylindrical abutment group was significantly higher than it was in the concave abutment group, in which the early global MBL was -0.4 ± 0.6 mm (p = .030). The estimated effect size (ES) was negative for the cylindrical abutment (ES = -1.3730, CI -2.5919 to -0.1327; t-value = -2.4893; p = .0139), therefore implying a loss of mean bone level, and it was positive for the concave abutment (ES = 2.8231; CI: 1.4379 to 4.2083; t-value = 4.0957; p = .0002), therefore implying an increase in the average bone level. CONCLUSIONS: The concave abutments presented significantly less early MBL at 6 months post-loading than classical cylindrical abutments did.

3D-Printed Teeth in Endodontics: Why, How, Problems and Future-A Narrative Review.

Three-dimensional printing offers possibilities for the development of new models in endodontics. Numerous studies have used 3D-printed teeth; however, protocols for the standardization of studies still need to be developed. Another problem with 3D-printed teeth is the different areas of literature requested to understand the processes. This review aims to gather evidence about 3D-printed teeth on the following aspects: (1) why they are advantageous; (2) how they are manufactured; (3) problems they present; and (4) future research topics. Natural teeth are still the standard practice in ex vivo studies and pre-clinical courses, but they have several drawbacks. Printed teeth may overcome all limitations of natural teeth. Printing technology relies on 3D data and post-processing tools to form a 3D model, ultimately generating a prototype using 3D printers. The major concerns with 3D-printed teeth are the resin hardness and printing accuracy of the canal anatomy. Guidance is presented for future studies to solve the problems of 3D-printed teeth and develop well-established protocols, for the standardization of methods to be achieved. In the future, 3D-printed teeth have the possibility to become the gold standard in ex vivo studies and endodontic training.

Endodontic Rotary Files, What Should an Endodontist Know?

Clinicians should be aware of all the characteristics and capacities of the instruments that are possible to use when conducting a root canal treatment. The wide variety of nickel-titanium (Ni-Ti) rotary systems on the market and the lack of standardisation of this type of instrument makes the choice in each specific case difficult. Therefore, this review is intended to summarize the characteristics that should be taken into account when choosing one instrument over another. It will be essential to know characteristics, of alloy from which the instrument is made. Moreover, the geometry of the instrument will determine its behaviour, being the mass, the one that marks its resistance to a greater extent. The movement performed by the file is another of the fundamental keys to understand rotary instruments. In conclusion, when performing root canal treatment, the characteristics of the instrument and the tooth must be taken into account, and the operator's own limitations should be known. This paper provides the key points to keep in mind when making this type of treatment.

Diagnostic Interval in Extranodal Non-Hodgkin Head and Neck Lymphomas.

The aim of this study is to measure the diagnostic interval (DI) of primary extranodal non-Hodgkin lymphomas (PE-NHL) affecting the head and neck and to discover any associated factors. With this aim, we performed a retrospective observational study in northwestern Spain on patients diagnosed between 1 January 2005 and 1 January 2016. A search was made across the electronic health records of the public health system of this region (SERGAS). DI was used as the dependent variable, and different clinicopathological data of the corresponding patients and tumors were analyzed as exposure variables. PE-NHLs were mostly located in Waldeyer's ring, and they presented a B phenotype and had a median DI of 65 days. Shorter diagnostic intervals were observed in (1) PE-NHL patients who had comorbidities (p = 0.02), (2) PE-NHL that caused symptoms of dysphagia (p = 0.04), (3) tumors with the highest proliferative activity (Ki67 > 80%) (p = 0.04), and (4) tumors diagnosed in the advanced stages of the disease (p = 0.004). Univariate analysis revealed a significant association between dysphagia and a shorter DI. We conclude that raising awareness about these neoplasms and warning about the presenting symptoms can contribute to earlier diagnoses of these tumors and to better outcomes.

Effectiveness of Different Irrigant Activation Systems on Smear Layer Removal: A Scanning Electron Microscopic Study.

The aim of this study was to evaluate the effectiveness of smear layer removal after the use of different irrigation methods (passive ultrasonic irrigation (PUI), continuous ultrasonic irrigation (CUI), apical negative pressure irrigation and conventional irrigation) using scanning electron microscopy (SEM) as an analytical tool. A total of 100 single-canal teeth were decoronated and randomly divided into five groups (n = 20) according to the irrigation method used: conventional irrigation with front outlet syringe, conventional irrigation with lateral outlet syringe, apical negative pressure irrigation (EndoVac), PUI with Irrisafe and CUI with ProUltra PiezoFlow ultrasonic irrigation needle. Root canal preparation was performed with the ProTaper Gold system up to the F4 instrument, and 5.25% NaOCl was used as an irrigant. After chemical-mechanical preparation, the roots were split longitudinally, and the coronal, middle and apical thirds were examined. SEM digital photomicrographs were taken at ×1000 magnification to evaluate the amount of smear layer in each root canal third; CUI significantly removed more smear layer than any other irrigant activation protocol (p < 0.05); CUI was more effective in removing the smear layer than the other irrigation protocols. However, none of the irrigation protocols were able to produce root canals completely free from smear layer.

Influence of operator expertise on glide path and root canal preparation of curved root canals with rotary and reciprocating motions.

This study intended to help practitioners selecting the appropriate motion according to their level of expertise for glide path and complete root canal preparation of curved canals in terms of instrument fracture and preparation time. A total of 160 curved root canals (angle >30°, radius <6 mm) were allocated randomly to 4 groups: A/B for expert operators and C/D for nonexpert operators. A/C were shaped with rotary and B/D with reciprocating instruments. Preparation time was registered and compared with Kruskal-Wallis non-parametric test and Dunn's post hoc test. Instrument separation was also registered and compared with chi-square test. A fractographic analysis was performed with scanning electron microscopy. The use of reciprocation motions allowed nonexpert operators to avoid instrument breakage during glide path and to prepare root canals faster. Experts were equally effective in rotary/reciprocating root canal shaping and faster with rotary motions than nonexpert operators, who also fractured significantly more rotary instruments.

Medication-Related Osteonecrosis of the Jaw: A Critical Narrative Review.

BACKGROUND: Nearly two decades have passed since a paradoxical reaction in the orofacial region to some bone modifying agents and other drugs was recognized, namely medication-related osteonecrosis of the jaw (MRONJ). PURPOSE: The aim of this manuscript was to critically review published data on MRONJ to provide an update on key terminology, concepts, and current trends in terms of prevention and diagnosis. In addition, our objective was to examine and evaluate the therapeutic options available for MRONJ. METHODS: The authors perused the most relevant literature relating to MRONJ through a search in textbooks and published articles included in several databases for the years 2003-2021. RESULTS AND CONCLUSIONS: A comprehensive update of the current understanding of these matters was elaborated, addressing these topics and identifying relevant gaps of knowledge. This review describes our updated view of the previous thematic blocks, highlights our current clinical directions, and emphasizes controversial aspects and barriers that may lead to extending the accumulating body of evidence related to this severe treatment sequela.

Clinical and esthetic outcomes of immediate implant placement compared to alveolar ridge preservation: a systematic review and meta-analysis.

AIM: The aim of this systematic review was to evaluate the efficacy of immediate implant placement (IIP) compared to implants placed after alveolar ridge preservation (ARP) in terms of clinical, esthetic, and patient-reported outcomes. METHODS: A manual and electronic search (National Library of Medicine) was performed for controlled clinical trials, with at least 12 months of follow-up. Primary outcome variable was implant survival and secondary outcomes were marginal bone level (MBL) (change), pink esthetic score (PES), mid-facial mucosal level (change), papilla index score, complications, and patient-reported outcomes. RESULTS: A total of 10 publications were included (7 randomized clinical trials and 3 controlled clinical trials). The results from the meta-analyses showed that survival rate was significantly lower in the IIP group compared to ARP group [RR = 0.33; 95% CI (0.14; 0.78); p = 0.01]. No significant differences between the two groups were observed regarding radiographic MBL, PES scores, or mid-facial mucosal level (p > 0.05). CONCLUSION: The results from this systematic review and meta-analysis showed that IIP had lower survival rates and similar esthetic results when compared to ARP. CLINICAL RELEVANCE: Clinicians should weigh the benefits and disadvantages of each intervention to select the optimal timing of implant placement.

Retreatment in endodontics with plastic core obturators. A new technique.

The aim of this study was to present a new technique for plastic carrier removal in retreatment situations. The gutta-percha technique that uses plastic carrier obturators is one of the most commonly used; however, removing this core is tedious and time-consuming. Two clinical cases were performed by an expert in the field of endodontics, to expose this technique, in which a conical ultrasonic tip with an active point and a Hëdstrom hand file allowed the removal of the plastic carrier quickly and effectively. The use of magnification is indispensable for a predictable success with this method.

Efficacy of continuous apical negative ultrasonic irrigation (CANUI) in penetration of simulated lateral canals in extracted teeth.

The aim of this study was to evaluate the efficacy of continuous apical negative ultrasonic irrigation into simulated lateral canals and the apical third in straight and curved root canals. Two simulated lateral canals were created 2, 4 and 6 mm from the working length in 120 single-rooted teeth (6 canals/tooth, n = 360 straight, n = 360 curved). The teeth were randomly divided into 3 experimental groups: positive pressure irrigation (PPI) (n = 20); passive ultrasonic irrigation (PUI) (n = 20); continuous apical negative ultrasonic irrigation (CANUI) (n = 20). 20% Chinese ink was added to a 5% sodium hypochlorite solution and delivered into the root canals. The results showed a significantly higher (P < 0.05) penetration of irrigant into the lateral canals and up to working length in the CANUI group for straight and curved roots. CANUI improves penetration into the lateral canals and up to the working length of the cleared teeth in straight and curved roots.

Periodontal response to a tricalcium silicate material or resin composite placed in close contact to the supracrestal tissue attachment: a histomorphometric comparative study.

OBJECTIVE: Subgingival dental restorations and periodontal health have been studied for many years; however, there is a low histological evidence on the behavior of new materials in the supracrestal tissue attachment. The aim of this study is to analyze the periodontal response when a tricalcium silicate material (TSM) or composite margin restorations is placed to 0.5 mm and 1.5 mm from the bone crest with a histomorphometric analysis in dogs. METHODS: Nine mongrel dogs were used in this study: four dogs (8 canine teeth) for TSM group, 4 dogs (8 canine teeth) for composite group, and 1 dog (2 canine teeth) with cavities without restorations. Cavity preparation of 2×2×1 mm was created on the buccal aspect of the canines at 0.5 and 1.5 mm of the crestal bone. Cavities were restored with composite and TSM or were left unrestored as control. After 12 weeks of healing, the dogs were euthanized and blocks containing the tooth and soft tissues were processed. RESULTS: In all the specimens, the junction epithelium was stablished apical to the tooth preparations. A shorter distance to the bone (0.5 cavity) implies greater apical periodontal migration regardless of the material used. In the TSM groups, the connective tissue height and the distance between bone level and apical margin preparation were greater than those in the composite groups, while the epithelium height was less. However, there were no statistically significant differences comparing TSM and composite groups at either 0.5 mm or 1.5 mm (p > 0.05). CONCLUSION: Histologic analysis did not show periodontal reattachment to TSM or composite. In both cases, bone crest migrates apically. For that reason, it is recommended to perform composite restorations at the subgingival level whenever the distance to the bone crest is at least 2 mm. CLINICAL RELEVANCE: Both composite and TSM do not achieve reinsertion of the connective tissue in the biological width.

Micro-computed Tomographic Evaluation of Dentinal Microcracks after Preparation of Curved Root Canals with ProTaper Gold, WaveOne Gold, and ProTaper Next Instruments.

INTRODUCTION: The aim of this study was to evaluate the influence of rotary (ProTaper Next [PTN; Dentsply Maillefer, Ballaigues, Switzerland] and ProTaper Gold [PTG, Dentsply Maillefer]) and reciprocating (WaveOne Gold [WOG, Dentsply Maillefer]) systems in dentinal microcrack generation after the preparation of curved root canals using micro-computed tomographic analysis. METHODS: Twenty-four human mandibular molars with curved roots were scanned in a micro-computed tomographic device using an isotropic resolution of 6.78 µm and randomly assigned into 1 of 3 experimental groups (n = 8) according to the root canal instrumentation system used (PTN, PTG, or WOG). Then, the root canals were prepared up to PTN X2, PTG F2, and WOG Primary instruments in the PTN, PTG, and WOG groups, respectively. After canal preparation, each specimen was scanned again. Pre- and postoperative cross-sectional images of the roots (N = 35,304) were analyzed to identify the presence of dentinal microcracks. RESULTS: Overall, 26% of the images presented dentinal defects (n = 9188). Dentinal microcracks were observed in 24.6%, 26%, and 27.4% of the postinstrumentation images from the PTN, PTG, and WOG groups, respectively. However, all of these dentinal microcracks were already present in the corresponding preoperative images. No new microcracks were generated after the preparation of curved root canals of mandibular molars using the aforementioned systems. CONCLUSIONS: Root canal instrumentation with PTN, PTG, and WOG systems did not induce the formation of new dentinal microcracks.

Association between periodontal disease and inflammatory bowel disease: a systematic review and meta-analysis.

OBJECTIVE: The aim of this systematic review was to investigate the association between periodontal disease (PD) and inflammatory bowel disease (IBD), and its two major forms Crohn's disease (CD) and ulcerative colitis (UC). MATERIALS AND METHODS: We searched articles in PubMed/MEDLINE, Web of Science, and LILACS published until March 2020. Observational studies evaluating the coexistence of PD in IBD and reported values of clinical periodontal parameters, or radiographic bone loss; and IBD diagnosis established by clinical, radiological, endoscopic and histological criteria were deemed eligible. RESULTS: A total of 9 studies were included (33,216 individuals). Only one study reported longitudinal data on IBDs onset in patients with PD. Several case-control studies reported coexistence. Meta-analysis showed that the presence of PD was associated with IBD (2.78 [95%CI 1.36-5.69]). PD was strongly associated both with CD (3.41 [95%CI 1.36-8.56]) and UC (3.98 [95%CI 2.02-7.87]). CONCLUSION: This review presents clear evidence for an association between PD and IBDs. Future studies should avoid non-longitudinal designs and focus on addressing direction. PD screening may be included in the multidisciplinary management of IBD patients. The mere theoretical possibility that PD may predispose to IBDs may be of key significance due to the rising incidence of diseases.